Van màng inox vi sinh tay vặn đúc liền khối nối nhanh clamp Inox Men

Clamp Connection Sanitary Forged Diaphragm Through Valve

Van màng inox vi sinh tay vặn đúc liền khối nối nhanh clamp

1. Valve Body Material: SS316L

2. Seal Material: PTFE + EPDM (double layer) / EPDM / SILICON / FPM (VITON)

3. Max. Working Pressure: 10Bar

4. Max. Working Temperature: 120 degree C

5. Availably  size: 1″-3″,DN20-DN65

6. Availably connection: Clamp/weld/thread/special connection

7. Availably standard: 3A/BPE/DIN/ISO/IDF

8. Operated: Manual, Pneumatic

9. Availably structure: Straight, tee, U-type, tank bottom

10. Control: Smart valve positioner / C-TOP control / position sensor

11. Certificate: 3A/54-02 (1580), PED/97/23/EC, FDA.177.2600

12. Application scope: Dairy, food, beverage, pharmacy, cosmetic, etc.

13. Packaging Details: Bubble pack for each valve. Outside packing are carton or plywood cases. Or as per the request of customers.

14. Delivery details: Usually within 20 days after receiving T/T down payment.

Application:

Diaphragm valve is a series of sanitary diaphragm valve, it is widely used on wine, dairy products, beverage, foodstuff industry, pharmacy etc. Achieving the requirement of control and open/close for the pipeline system.

Material:

Steel components: stainless steel 304, stainless316L Seal: EPDM + PTFE the seals are imported seal material (which conform to the FDA177.2600 standard). With LC unique technology, will be a bolt coupling nut with EPDM/PTFE perfect combination into a whole sealing parts, the sealing parts contact with  the media of the parts of the PTFE material has good cold resistance (-25 ‘C) excellent heat-resistance (+250 ‘C) of all sorts of chemical preparation is well tolerated and excellent wear resistance to flow.

Word Principle:

The diaphragm is close under normal state, and that moment the diaphragm clung to the valve body cavity, and closing off the flow path through the pipeline. When the diaphragm valve have the requirement to clean or open, the valve stem moves upwards according to the manual or pneumatic actuator equipment, spherical diaphragms naturally bend upwards, so that the valve is open and reach the requirement of clean and open. The diaphragm make the lower body cavity and the upper chamber separated from the valve cover, so that the stem at the top of the diaphragm, disc media and other parts from corrosion, eliminating the need for packing structure, and no media leaks. The optimize valve body made the cleaning liquid out totally, so that don’t have any entrapment.

Standard Design:

Various standards of valves can be provided to clients: DIN, 3A, SNS, ISO; IDF, BS/RJT, ASME/BPE etc. The parts of valves: an actuator, diaphragm and body which assemble together with bolt and nuts. The entire valve assembly in meticulously. The actuator can be manual and pneumatic the diaphragm made of artificial rubber which can have all kinds of soft and hard degree. The body can be two way or three way. The connection of the diaphragm as follows: clamp, weld. T- type tee, U type tee etc.