Van lấy mẫu inox vi sinh nối nhanh clamp nối hàn nối ren Inox Men

Sampling Valve

Van lấy mẫu inox vi sinh nối nhanh clamp nối hàn nối ren

Application

This type of valves is designed to be used for disinfection and sterilization before and after each sampling operation

Material Science

Body: stainless steel AISI316L

Valve head: stainless steel AISI304

Diaphragm: silicone rubber (standard type of valve), EPDM rubber (with a micro interface valve with)

Technical Data

Pressure

The maximum working pressure on the valve seat (off valve): 1.0Mpa

Maximum working pressure on the valve cover (open valve): stainless steel 1.0Mpa

Opening valve: Sampling

By rotating the handle (adjustable valve) or switch control lever (open, close), you can open the valve. When the shaft core and the diaphragm is open, so that the fluid can be through sampling

Standard Design: 

The aseptic sampling valve comprises three parts: a valve body, a valve head and a piece of membrane. Like glial diaphragm valves are placed on the shaft core of the valve head, and are used as an extension of the spool

Valve closure: Sterilization Sampling

Reverse operation handle, built-in spring to close the valve, while maintaining the channel between the two ends of the hose is communicated, in order to carry out sterilization and disinfection treatment. If required, the user control valve at the outlet end.