Product Name: ReducerLabel: As per customer’s requestPacking: method Carton, plywood pallet, plywood caseDelivery: Transport by Sea / Air / Express / Pickup
PICTURE
PRODUCT’S INFORMATION
Clamped Reducer ISO/IDF
Size
L
K
K1
A×B
T
304
306
1″×3/4″
80
50.5
34
25.4×19
1.65×1.65
1 1/4″×1″
92
50.5
50.5
31.8×25.4
1.65×1.65
1 1/2″×1 1/4
92
50.5
50.5
31.8×31.8
1.65×1.65
1 1/2″×1″
92
50.5
50.5
38.1×25.4
1.65×1.65
2″×1 1/2″
109
64
50.5
50.8×38.1
1.65×1.65
2″×1 1/4″
109
64
50.5
50.8×31.8
1.65×1.65
2″×1″
109
64
50.5
50.8×25.4
1.65×1.65
2 1/2″×2″
109
77.5
64
63.5×50.8
2.11×2.11
2 1/2″×1 1/2″
109
77.5
50.5
63.5×38.1
2.11×2.11
2 1/2″×1″
109
77.5
50.5
63.5×25.4
2.11×2.11
3″×2 1/2″
109
91
77.5
76.2×63.5
2.11×2.11
3″×2″
109
91
64
76.2×50.8
2.11×2.11
3″×1 1/2″
109
91
50.5
76.2×38.1
2.11×2.11
3 1/2″×3″
109
106
91
89×76.2
2.11×2.11
3 1/2″×2 1/2″
109
106
77.5
89×63.5
2.11×2.11
3 1/2″×2″
109
106
64
89×50.8
2.11×2.11
4″×3 1/2″
129
119
106
101.6×89
2.11×2.11
4″×3″
129
119
91
101.6×76.2
2.11×2.11
4″×2 1/2″
129
119
77.5
101.6×63.5
2.11×2.11
4″×2″
129
119
64
101.6×50.8
2.11×2.11
PRODUCT TESTING
The entire valve assembly testing
100% inspection in accordance with the detection of single
Valve seal test
Testing standards is carried out in accordance with DIN EN 12266-1
100% of the valves are sealed after installation test
The detection of surface finish
100% visual inspection
Surface finish cytometry
Weld Inspection
100% visual inspection
ALL welds are detected through the endoscope 100% , rather than directly with the naked eye
100% of the stress test
Contact with the material body for non-destructive testing
( According to customer requirements or internal norms required )
Body material composition
– Spectrometer detection
– Detection of ferrite content
Body material structure
– Visually
– Liquid penetrant test holes
– X -ray inspection
Size control
– Standards of professional equipment testing
– Coordinate Measuring Machine (CMM)
Meets DIN EN 10204 specification material proof
Provided by stainless steel oven Analysis Report No. 3.1
(In line with U.S factory test report MTR)
This also applies to all material analysis report in accordance with the requirements of ASME-BPE standard
documentation to prove the consistency of the results
specification provides consistency proof
LƯU Ý:
Sản phẩm Bầu giảm đồng tâm inox vi sinh nối clamp được phát triển liên tục, thông tin có thể có thay đổi mà không kịp thời thông báo đến Quý khách hàng!
Đánh giá sản phẩm của chúng tôi